The J-Series electric submersible pumps offer top performance and high quality for a very modest investment. The pumps are designed for long life and trouble free performance.

• TWO PUMPS IN ONE
  Most J-Series pumps can quickly be converted from High Volume to High Head (or vice-versa) by merely changing the impeller and the suction plate. For High Head JH-Series – Click here. Other brands often require major changes to achieve different heads or volumes.
  
• Motor casings, hardware and impeller shafts are made from 304 stainless steel, with all other exposed parts made of cast iron
• Pumps 1/2HP and above, feature double mechanical seals which work in a separate oil chamber.
• Oil seal ring(s) are installed above the impeller to help keep impurities and abrasives away from the mechanical seals.
• All pumps are equipped with an overload protection which guards against low and high amperage as well as excessive temperature
• SLIDE RAIL SYSTEMS
  The J55 and J75 can also be mounted on the BJM slide rail system.

• Max. Flow: Gpm: 158
• Max. Head: Ft: 60'
• Pump Type: Sump, Side Discharge
• Strainer Opening: 0.5625-x 0.25" Slot
• Discharge Size: 3" NPT-M
• Max. Submerged Depth: 65'
• Min. Submerged Depth: 9.5"
• Shipping Weightibs: 69

• Motor Casing: 304SS
• Pump Volute: Cast Iron
• Impeller - Multi Vane: Cast Iron
• Lip Seals &0-Rings: Buna-N
• Rotor Shaft: 304 SS
• External Hardware: 304 SS
• Oty. Oil In Seal Chamber: 9 U.S. FL. OZ.
• Oty. Oil In Motor Stator: No oil in motor stator (After sen* 42043) 13.5 U.S. FL. OZ. (Before sen? 42043)

• Motor Rating: Hp: 2
• Motor Rpm: 3450
• Motor Insulation Cuss: F
• Motor Service Factor: 1.1
• Voltage: 208/230/460/575, 3ph- 60 Hz
• Motor Protection: Thermal & Amp Overload
• Power Cord: Gage; Length: A.W.G. 16/4, 33', STOW
• Maximum Liquid Temperature: 104° F
• Seal Minder: Optional