Interested in this item or want more information?
8:00 & 5:00 PST
Phone: 657-777-3411
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

GENERAL DATA

Max. Flow: Gpm: 1611
Max. Head: Ft: 70.5"
Pump Type: Slurry
Strainer Opening: 1.375"
Discharge Size: 6" NPT-M
Discharge Connection: 6" Hose Barb Optional
Max. Submerged Depth: 65'
Shipping Weight:Lbs: 685

CONSTRUCTION/MATERIAL DATA

Motor Casing: Cast Iron
Pump Volute: Ductile Iron with interior hardness coating to 1180 DPH
Impeller - Multi Vane: Hi-Chrome
Lip Seals & O-Rings: Buna - N
Rotor Shaft: 410 SS
External Hardware: 304 SS
Qty. Oil In Seal Chamber: 125 U.S. FL. OZ.

ELECTRICAL/MOTOR DATA

Motor Rating: Hp: 20
Motor Rpm: 1750
Motor Insulation Class: H
Motor Service Factor: 1.15
Voltage: 460/575, 3ph-60Hz
Motor Protection: Thermal & Amp Overload
Power Cord: Gage; Length: A.W.G 8/5; 50', SOOW
Maximum Liquid Temperature: 104° F
Seal Minder: Optional

EVERY KZNR HI-HARD™ slurry pump is constructed with the following abrasive resistant chrome iron components

Agitator - to fluidize settled solids into a slurry.
Wear plate - replaceable hardened surface on the suction side where erosion would cause a loss of pump performance.
Semi - open Impeller - to handle abrasive solid concentrations as high as 70% by weight.

EVERY KZNR HI-HARD slurry pump model is protected by;

Class H motor insulation - and built in amperage ( FLA ) and temperature overload protection.
Double silicon carbide mechanical seals - in a separate oil filled seal chamber.
Heavy Duty Lip Seal – additional protection for the mechanical seals.
Stainless steel shaft and shaft sleeve – saves on shaft wear due to abrasives and corrosion.
Pump volutes cast from hardened Ductile Iron - 300 Brinnell hardness; twice as abrasive resistant as standard ductile iron.

EVERY KZNR HI-HARD is a top discharge pump;

KZNR heavy duty slurry pumps are utility pumps; frequently dragged from one site to another. The KZNR doesn’t have a side discharge connection that can break off or be damaged as it is pulled and pushed into place.
Top discharge pumps are cooled by pumped liquid - The KZNR slurry pumps can pump a sump or pit down to within "inches" of the bottom. A side discharge pump without a cooling jacket must stay submerged to avoid overheating, leaving as much as 3 feet of un-pumped slurry.
Top discharge means "SLIM" - even the largest model with a 22.75 inch "waistline" will fit down a manhole with a hose attached.
The KZNR’s hardened ductile iron volutes - cast with extra thick walls at the point where pumped slurry enters the discharge.

Additional Information

Manufacturer: BJM Pumps, LLC

For More Information on the KZNR Hi-Hard Severe Duty Slurry Pump KZN150LR-460T, [Click Here] to Link to Manufacturer Web Site

Search: