The Dayton Pattern axe is the most-recognized axe pattern. So named for originating in the Dayton Ohio area, this is a great all around axe pattern available in various head weights and handle options.

(click image to enlarge)

Quick Overview

Forged steel head. Made in USA.
Hand sharpened, tapered bit for cutting and splitting.
ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
Head coated with red enamel and cutting edges in clear lacquer to deter rust.
20" straight American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content.
The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2" of the overall length of the handle is removed during assembly.

Interested in this item or want more information?
8:00 & 5:00 PST
Phone: 657-777-3411
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

4 lb. Miner's axe in a Dayton pattern has a 20" straight American Hickory handle. Known as a miner’s axe, it features a short handle used for close quarters work. Cutting edge is approximately 5" of overall length and the poll is square.

Additional Information

Manufacturer: Council Tool

For More Information on the Dayton Pattern Miner's Axe with 20" Handle 40MD20, [Click Here] to Link to Manufacturer Web Site

Search: