AquaBead is made of a high-strength polymer core that is coated with paper on both sides and perforated in a manner that achieves solid coverage with a single pass. Featuring a beaded nose, the product is forgiving to the flaws and variations of edge cuts and surpasses the impact resistance of most metal beads that easily dent and have to be pulled back off. Since the adhesive paper is water-activated, contractors can apply it using only a spray bottle — no nails or compound are required — eliminating common punch list issues such as nail pops and edge cracking. Available in Outside 90° beaded nose, Bullnose and L-Trim.
AquaBead is made of a high-strength polymer core that is coated with paper on both sides and perforated in a manner that achieves solid coverage with a single pass. Featuring a beaded nose, the product is forgiving to the flaws and variations of edge cuts and surpasses the impact resistance of most metal beads that easily dent and have to be pulled back off. Since the adhesive paper is water-activated, contractors can apply it using only a spray bottle — no nails or compound are required — eliminating common punch list issues such as nail pops and edge cracking. Available in Outside 90° beaded nose, Bullnose and L-Trim. Outside 90° 8' - 313724 Outside 90° 9' - 313723 Outside 90° 10' - 313725 Outside 90° 12' - 314144 Bullnose 8' - 313728 Bullnose 9' - 313727 Bullnose 10' - 313721 L-Trim 10' - 313726
Application: Embed bead into compound and remove excess compound by wiping with a drywall knife. Allow compound to dry and then coat the outside tabs to finish corner. If necessary, sand once compound is dry and recoat edges until desired finish is achieved.