Gravelpave porous pavement allows you to park, drive, walk, or ride on a beautiful decorative gravel surface.
Gravelpave2 is a structure to provide heavy load bearing support and true containment of gravel to create a porous surface with unlimited traffic volume and/or duration time for parking. The system can be used for storage and filtration of rainwater. For example, a cross-section with an 12" deep base course (at 20% void space) and the one inch of Gravelpave2 (at 35%) would store 2.75" of rain. Although bacteria concentrations are lower than with Grasspave2, polluted runoff and vehicle drippings are consumed prior to reaching the water table.
Gravelpave2 consists of a geotextile fabric injection molded to the ring and grid structure. Gravelpave2 comes in 4 standard colors to match your aggregate fill. Gravelpave2 also requires a base course
Our product line is flexible and adheres to undulations, freeze/thaw, and natural topographical changes in elevation. But did you know we are flexible in the horizontal as well? Our product rolls can curve slightly to fit many of your needs. Applications where slight curve may apply:
If the angle you are curving is greater or the width of the product needs to be larger, you can easily cut and reconfigure our product line. Advanced curves, reuse of pieces (for less waste), and conforming to obstacles and curbing can easily be achieved with Grasspave, Gravelpave, Slopetame and Draincore. Simply cut cut our product with pruning shears or heavy-duty scissors, shift the rolls, and re-fit pieces to conform to the site's needs. We do recommend you connect rolls to adjacent rolls with the snap-fit connector, when possible.