DESCRIPTION

A partical size controlled talc with special release agents, CERTI-VEX TALC RELEASE is applied to dried Vexcon coatings that are dry to touch, but still might be "green", (not fully dried through). Certi-Vex Talc Relese aids in protecting newly coated floors from damage caused by on going construction work. Special release agents prevent sticking and blocking of temporary protective coverings, such as building paper, plastic, cardboard and plywood.

BENEFITS

• Allows for construction work to continue over completed covered floors without scratching and marking.
• Easy clean up - just vacumm up residual Talc Release.

APPLICATION

• Sprinkle evenly on coated floor.

WARNING

• Certi-Vex Talc Release will only function on dried Vexcon coatings.
• Do not apply to wet or tacky coatings.
• Do not apply prior to 48 hours after application of Powercoat Epoxy.

VITAL STATISTICS

• Controlled particle size Talc Release compound.

PACKAGING

• Certi-Vex Talc Release is packed 50# in 5 gallon pails.

HEALTH AND SAFETY

• Certi-Vex Talc Release is not hazardous, but should be treated as a nuisance dust while applying use dust mask.
• Use only with adequate ventilation.
• Use of goggles and other protective clothing is advised when using this product.
• If swallowed, do not induce vomiting. Vexcon MSDS # OP132 is an integral part of the safety and application of our product. A short synopsis is provided in this product data sheet. Before using this Vexcon product it is advisable to obtain a copy of the MSDS, #OP132, from your distributor or by contacting Vexcon Chemicals.
• FOR USE BY PROFESSIONAL APPLICATORS ONLY