DESCRIPTION

CERTI-VEX EQUIPMENT CLEANER effectively cleans and maintains spray equipment after use of curing compounds, sealers, epoxies and urethane coatings. Cleans overspray areas, is non flammable and efficient thinner.

BENEFITS

• Meets EPA and AIM VOC regulations
• Non Red label, high flash point
• Safer, quicker clean up
• Efficient viscosity reduction when used as thinner

APPLICATION

Clean application equipment including spray tips and nozzles and solvent resistant brushes daily to ensure ease of application of coatings. When using with waterborne products, flush with water after using Certi-Vex Equipment Cleaner

SPECIAL NOTES

• May affect some surface areas if splashed.

WARNING

When used, the material may be classified a hazardous material for purposes of disposal. This material should be kept in a separate container and local, state, federal rules for disposal must be followed. Contact Vexcon if additional questions and/or information is required and consult the Material Safety Data Sheet.

PACKAGING

Certi-Vex Equipment Cleaner is available in 55-gallon drums, 1-gallon pails and 1-gallon units. Contact Vexcon to discuss your customized packaging requirements.

VITAL STATISTICS

HEALTH AND SAFETY

• Use only with adequate ventilation.
• Use of gloves, goggles and other protective clothing is advised when using this product.
• If swallowed, do not induce vomiting

Vexcon MSDS #OP105 is an integral part of the safety and application of our product. A short synopsis is provided in this product data sheet. Before using this Vexcon product it is advisable to obtain a copy of the MSDS, #OP105, from your distributor or by contacting Vexcon Chemicals