High solids densifier that provides a sealed and hardened surface that is low maintenance, wear and abrasion resistant. Easy and quick to apply, the product produces glossy floors without the use of a topical coating.
StarSeal PS Clear enhances the natural beauty of gray and decorative concrete and produces a wear-pattern free, shine retentive permanently sealed, low-maintenance concrete floor. StarSeal PS Clear is a potassium silicate that rapidly penetrates without scrubbing and rinsing. Simply apply, re-distribute and re-apply until the concrete no longer absorbs the material and is fully densified. Once absorbed, StarSeal PS Clear reacts with the calcium hydroxide. This reaction makes the concrete stronge, more durable, easier to clean, abrasion resistant and dust free. A fully densified concrete floor is the foundation for a stain-free floor. By adding both the StarSeal Fixative and StarSeal Finish Coat Ultra the concrete will resist motor oil, food acids and oils along with a variety of other typical hazards on concrete floors.
Use StarSeal PS Clear HB when densifying soft or very porous concrete. This material is a high solids product that allows the pores to be plugged in one or two coats. After the StarSeal PS Clear HB has plugged up the concrete, apply the StarSeal PS Clear until the floor is fully densified to rejection.
Clean the concrete making sure that all cures, cure & seals, other pore plugging or film forming products are removed. For removal of laitance and residual salts that may have occurred during the curing process, use Vexcon’s StarSeal FC Floor Cleaner. For complete floor cleaner instructions, refer to data sheet OP134. When the concrete is clean, dry, and water absorbent, the concrete is ready for StarSeal PS Clear to be applied.
Tested by ASTM D1308, “Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes” for 1 hour. Refer to Technical Note TN184, available at vexcon.com/starsealps/.
Properly installed, densified or polished StarSeal PS floors are covered by our extensive performance warranties. Warranties apply to floors that exclusively use StarSeal PS materials on the floor under warranty consideration. Complete warranty information is available at vexcon.com/starsealps/.
Interior and exterior concrete durfaces such as; auto dealrerships, distribution centers, Educational facilities, stadiums and sports arenas, parking decks, civic centers, correctional facilities and retail stores. Can be applies over neutralized acid stains or integrally colored of shake on handeded concrete.
In addition to StarSeal PS Clear application areas: restaurants, residence, shopping malls, kitchen, food courts, schools, pool decks, stadiums, counter tops, food markets and food handling areas.
Any area requiring a decorative colored dendified/hardened or polished concrete floor. Ideal for high UV esposed environments
For complete installation instructions, refer to Technical Note TN101A available at vexcon.com/starsealps/.
Net Coverage Rate: 200-300 sq. ft./gallon. Apply in thin coats depending on the porosity of the concrete. The goal is to densify the concrete to rejection
NOTE: Silicate solutions do not perform as liquid membraneforming curing compounds for meeting ASTM C309, and do not adequately reduce water loss as tested by ASTM C156. Supplemental curing methods are recommended, such as water mist, cure & seals (StarSeal 309), bond breakers (Clean Lift), dissipating curing compounds (Certi-Vex Envio Cure), or moisture retention blankets. For maximum curing results, the surface must be kept damp over 72 hours
Invisible surface repair treatment that improves the appearance, gloss and clarity of concrete. StarSeal Fusion technology makes large and small surface imperfections such as crazing, pin holes, pop-outsand divots blend into the concrete.
Spills should be removed promptly and cleaned with StarSeal EF Degreaser and Cleaner or a high quality commercial alkaline detergent. Floors should be cleaned as needed.
StarSeal PS Clear treated concrete is performance validated with the following standards
StarSeal PS Clear is available in 55-gallon drums and 5-gallon pails. Contact Vexcon to discuss your customized packaging requirements.
Vexcon MSDS CT101 is an integral part of the safety and application of our product. Before using this Vexcon product, obtain a copy of the MSDS from your distributor or by contacting Vexcon Chemicals.