Details

Spec West Liquid Release for Decorative Concrete is a non-pigmented method to mat-type texturing tools from the surface. Spec West Liquid Release for Decorative Concrete is optimal for fast track installation and an alternative in situations when release powders may be prohibited.

Application

1. Spec West Liquid Release for Decorative Concrete is applied just before placement of most mat-type impriting tools during the plastic stage of set.

2. Apply Spec West Liquid Release for Decorative Concrete by misting the surface with a pump-up type sprayer equipped with a fan tip. Apply enough product to evenly cover the area to be immediately imprinted (150-200 square feet) while avoiding evaporation of the material prior to using texturing mats.

3. Spec West Liquid Release for Decorative Concrete will naturally evaporate from the textured concrete surface (usually after 12 hours). After Spec West Liquid Release for Decorative Concrete has fully dissipated, alternative colorants can be applied.

Package Size / Shelf Life

• Spec West Liquid Release for Decorative Concrete is available in 1-gallon and 5-gallon containers.
• Spec West Liquid Release for Decorative Concrete has a shelf life of one year.

Coverage Rates

• Under normal conditions, Spec West Liquid Release for Decorative Concrete will theoretically cover 300 square feel per gallon.
• Note - Actual coverage may vary depending on the application method, wind condition, texture of concrete prior to application, and other local conditions.

• Spec Data Sheet (Application and Technical Data)  [Click Here]


• Material Safety Data Sheet  [Click Here]

Additional Information

Manufacturer: Spec-West Concrete Systems