Details

Reducer Coupling available on G400-60 models (6" discharge). Reduces discharge to 4" for use with 4" discharge pipe / accessories.

Stainless Steel models for use in corrosive or "clean" environments. Includes stainless tank, valve body, cap, and seat, special coated aluminum piston, Teflon encapsulated or silicon o-rings. No lubrication required.

Special Paint and other modifications to meet individual applications.

Filtered air. No lubrication required.

40-125 PSI.

Maximum Ambient Temperature = 400°F (205°C).

Manual Valves - 2-way manual ball valves, used to control the air supply to the Air Blasters and 3-way manual ball valves for manual firing of the Air Blasters.

Solenoid Valves - 3-way normally open solenoid valves for automated firing of the Air Blasters.

Airline Kits - Recommended for trouble-free operation and long life of Air Blasters. Includes airline filter and pressure regulator with gauge. Either standard or auto-drain models available.

Airline Check Valves - Used to prevent accidental firing of Air Blaster if air supply problem causes pressure to drop in Air Blaster fill line.

Quick Exhaust Valve - This patent pending valve was designed specifically for use with Global Air Blasters. It quickly evacuates air from the Air Blaster valve, guaranteeing a full, powerful blast even when the solenoid or 3-way valve is up to 100' from the Air Blaster. This valve increases the blast force by as much as 20% compared to other quick exhaust valves or a tank mounted solenoid. The G-Series quick exhaust valve also insures closure of the Air Blaster valve immediately after the blast. This prevents contamination from entering valve or tank.

High Temperature Diffuser Nozzles - Heavy, cast, special stainless alloy rated for at least one-year life in temperatures of 2,010°F (1,100°C). Used to direct air blast for special applications.

High Temperature Discharge Assemblies - Include mount plate, discharge pipe, mount flange, high temperature gasket, and hardware. Available in weld-on and bolt-on versions.

Mount Hardware Kits - Straps and hardware for supporting tanks when bin wall strength is not adequate.

Blaster Master Timer - A micro-controller based sequencing timer used to control the firing time interval and sequence of one or more Air Blasters.

Safety Cable Kits - Includes anchor ring and 14 feet of cable.

G400 AIR BLASTER Accessories AIR BLASTER
MODEL Inlet
Port Size 3-Way Valve
or 3-Way
N/O Solenoid Quick Exhaust
Valve* Straight
High Temp.
Discharge
Assembly 90° High
Temp.
Discharge
Assembly Tank Mount
Hardware Safety
Cable Kit 4.0" DISCHARGE: G400-40-50 3/4" 3/4" NPT 1" QEV 4HT 4HT90S TMH-12 AB-14 G400-40-150 3/4" 3/4" NPT 1" QEV 4HT 4HT90L TMH-20** AB-14 6.0" DISCHARGE: G400-60-300 3/4" 3/4" NPT 1" QEV N/A N/A TMH-24** AB-14 G400-60-650 3/4" 3/4" NPT 1" QEV N/A N/A TMH-30** AB-14
** Our patent pending 1” Quick Exhaust Valve can be ordered separately. 4” & 6” GWE models include factory installed Quick Exhaust Valve.
Designed for High Temperature Environments - Special materials used to provide reliable, long term performance in hot environments. Can withstand temperatures encountered when used on kilns operating in excess of 2,000°F (1,100°C). Tolerates ambient temperatures up to 400°F (200°C). Produces Results Quickly and Efficiently - Quick blast of air permeates the material and dislodges trapped solids. Handles Big Loads - Air blast spreads out in a cone pattern to aerate and loosen a large volume of material at one time. When used in combination, multiple Air Blasters can restore flow to hundreds, thousands, or millions of cubic feet of material. Quiet Operation - Noise of air blast is dampened by the material being aerated. Energy Efficient - Air Blasters have low air consumption since they collect air and are fired intermittently. They require only a small fraction of the air used to operate pneumatic vibrators. Minimal Maintenance - Single moving part, no springs, no motors, no bearings, make Air Blasters easy to maintain for many years. No lubrication is required. Special synergistic coating on piston is self-lubricating. More Powerful Air Blast - Lightweight piston, short piston travel, direct blast design, and aerodynamically designed exhaust windows allow the tank to be emptied more quickly creating a stronger, more productive blast. Quick Exhaust Valve Standard - Air Blaster has Global's unique G-Series quick exhaust valve permanently mounted. This patent pending valve was designed specifically for use with Global Air Blasters. It quickly evacuates air from the Air Blaster valve, guaranteeing a full, powerful blast even when the solenoid or 3-way valve is up to 100' from the Air Blaster. The G-Series quick exhaust valve also insures closure of the Air Blaster valve immediately after the blast. This prevents contamination from entering valve or tank. No Leakage - Piston designed to prevent air loss during blast. Special coated piston incorporates a seal that prevents air seepage between the piston and valve seat. Air loss can be a problem in blasters using a metal-to-metal seal. Fills Faster - Standard quick fill port allows tank to fill in less than 60 seconds. This makes rapid repeat firing possible when needed. Longevity - Coated aluminum piston is self-lubricating. Coated valve parts resist acid and basic environments. Carbon steel tank with corrosion and heat resistant paint. Piston movement engineered to prevent excessive wear and high impact. Ease of Service - All parts individually replaceable. If a part becomes worn or damaged, it is not necessary to replace the entire valve assembly. ASME Certified Pressure Vessels - All details of design, materials, construction, and workmanship of each vessel conforms to the ASME Code for Pressure Vessels, Section VIII, Division 1. Documentation available for each Air Blaster upon request. Five-Year Warranty

Additional Information

Manufacturer: Global