DuraShield SRT is a new generation high performance concrete sealer that incorporates the gloss and application characteristics of a solvent-based sealer, the low VOCs and easy clean-up of a water-based product, the chemical resistance of an epoxy and abrasion resistance of a urethane. DuraShield SRT develops a rich, high gloss, wet-look to deepen the color and enhance the appearance of pigmented, decorative concrete. DuraShield SRT can be used to reseal concrete and may be used in cooler temperatures (down to 40°F / 4.4°C).

Unlike standard acrylic sealers, DuraShield SRT will not soften with exposure to solvents. DuraShield SRT is a 2-component, high solids, catalyzed sealer that provides superior chemical and abrasion resistance and will never yellow. DuraShield SRT contains no solvent. A functionalized alkoxy silane is added before application to crosslink the resin for maximum performance.

Uses

• Seal and protect any interior horizontal concrete surface from abrasion and environmental conditions
• Protect and amplify the beauty of exposed aggregate, decorative concrete, terrazzo and man-made or natural stone
• Deepen the color of stamped concrete while shielding it from water, freeze thaw damage, dirt and most hydrocarbon chemicals
• Floors or exterior slabs subject to solvent or gasoline spills

Advantages

• High gloss and wet look appearance
• Low VOCs - meets all EPA standards
• Low odor for indoor applications
• Durable for demanding applications
• Usable down to 40°F (4.4°C)
• Can recoat over solvent-based and water-based sealers or cure & seal products
• Chemical resistance superior to standard acrylic sealers and comparable to epoxies
• Resists aliphatic solvents, acids, alkalis, gasoline, oils and grease
• Superior resistance to ultraviolet light, freeze/thaw cycling and acid rain
• Keeps surfaces from dusting and chalking
• Makes surfaces easier to clean