Enclosure
Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64.
Dimensions
9.5” L x 5.25” W x 5.875” H
Weight
3.8 Lbs (standard 4 gas with batteries)
Detection Principle
Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.
Sensor Life
2 Years under normal conditions.
Sampling Method
Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
Display
3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
Language
Readout can display in 5 languages (English, French, German, Italian, or Spanish.
Alarms
2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
Alarm Method
Buzzer 95 dB at 30 cm, four high intensity LED’s.
Controls
4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.
Continuous Operation
At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH.
Power Source
4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
Operating Temp. & Humidity
-20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.
Response Time
30 Seconds to 90% (for most gases) using standard 5 ft hose.
Safety Rating
Intrinsically Safe, Class I Groups A, B, C, D.
Approvals: CSA / CE
Standard Accessories
Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter
Optional Accessories
Warranty
Two year material and workmanship, one year for PID sensor